硅树脂玻璃漆管(自熄管)Silicone-Resin coated fiberglass sleeving(Self-extinguishable sleeving)

玻璃纤维自熄管采用无碱玻璃纤维纺织,经高温处理,然后涂以特种硅树脂干燥而成。本产品有优良的耐热性、弹性和耐潮性以及良好的电性能和耐化学性能,适用于H级(200℃)高温电机,电器、仪表、电视机等的布线绝缘与机械保护。




Self-extinguishable sleeving is made of E-fiberglass braided sleeving treated at high temperature then coated a special kind silicone resin, these sleeving possesses of good dielectric, Self-extinguishable excellent elaslicity its used as class-H(200℃). electrical machinery, electrical appliances, instruments TV-sets collected strands of wire and their protection devices.

外观:表面平滑,整洁,纯白色。Appearance: surface smooth, clear and neat ends, pure white colour
尺寸:长度1000±20毫米(连续长度可由供需双方协议)Dimension:Length-the standard length is 1000±20mm(Continuous length may be negotiated)



内径与壁厚
Inside Diameter and wall thickness   毫米(mm)

内径(Inside Diameter)壁厚(wall thickness)
规格(size)公差(tolerance)最小(minimum)最大(maximum)
1~3±0.200.200.60
4~9±0.300.300.70
10~16±0.500.400.80

注明:ф16毫米以上规格或特殊要求按供需双方协议。
NOTE:the size over ф 16mm or special requirement may be negotiated.


性能指标
Performance Index

性能(performance)指标  index
击穿电压(平均值)Breakdown Voltage(even)4000
2500
1000
低温弯曲性 Bending at low temperature在零下40℃中放置60分钟涂层无可见开裂或脱落。No cracking or detachment of the coating shell be visible after 60 min at -40℃
热处理后弯曲性 Bending after heat treatment 在200℃条件下放置48小时涂层无可见开裂或脱落No cracking or detachmant of the coating shell be Visible after 48±1hr at 200℃±3℃
其它性能 The other performance参见GB7113-7117-86 Reference to GB 7113-7117-86



硅橡胶玻璃漆管

Silicone-polymer coated fiberglass sleecing

玻璃纤维自熄管采用无碱玻璃纤维纺织,经高温处理,然后涂以特种硅树脂干燥而成。本产品有优良的耐热性、弹性和耐潮性以及良好的电性能和耐化学性能,适用于H级(200℃)高温电机,电器、仪表、电视机等的布线绝缘与机械保护。
外观:表面平滑,整洁,本色。
尺寸:长度1000±20毫米(连续长度可由供需双方协议)




Self-extinguishable sleeving is made of E-fiberglass braided sleeving treated at high temperature then coated a special kind silicone resin, these sleeving possesses of good dielectric, Self-extinguishable excellent elaslicity its used as class-H(200℃). electrical machinery, electrical appliances, instruments TV-sets collected strands of wire and their protection devices.

Appearance:surface smooth, clear and neat ends, natural colour.
Dimension:length-the standard length is 1000±20 mm(continuous length may be negotiated)

内径与壁厚
Inside Diameter and wall thickness   毫米(mm)

内径(Inside Diameter)壁厚(wall thickness)
规格(size)公差(tolerance)最小(minimum)最大(maximum)
1~3±0.200.200.60
4~9±0.300.300.70
10~16±0.500.400.80

注明:ф16毫米以上规格或特殊要求按供需双方协议。
NOTE:the size over ф 16mm or special requirement may be negotiated.


性能指标
Performance Index

性能(performance)指标  index
击穿电压(平均值)Breakdown Voltage(even)4000
2500
1000
低温弯曲性 Bending at low temperature在零下40℃中放置60分钟涂层无可见开裂或脱落。No cracking or detachment of the coating shell be visible after 60 min at -40℃
热处理后弯曲性 Bending after heat treatment 在200℃条件下放置48小时涂层无可见开裂或脱落No cracking or detachmant of the coating shell be Visible after 48±1hr at 200℃±3℃
其它性能 The other performance参见GB7113-7117-86 Reference to GB 7113-7117-86



聚氨酯玻璃漆管
Poyurethane resin coated fiberglass sleeving

聚氨酯玻璃漆管采用无碱玻璃纤维纺织,涂复特制聚氨酯树脂经烘焙而成,此涂层与玻璃纤维结合良好,能保持老化后的介电强度。本产品有可靠的电性能较好的耐热性,优良的柔软性以及耐酸、碱和有机溶剂等特性,使用于F级(155℃)电机,电器以及各种家用电器作布线绝缘与机械保护。

外观:表面光洁,端部整齐,本白色。
尺寸:长度1000
±20毫米(连续长度可由供需双方协议)

套管生产线
(Sleebing assembly line)
样品(Sample)




Polyrethane fiberglass sleeving is made of E-fibergalss braided sleeving are baking coated with polyurethane resin. The coating has high adhesion to the glass braid, Retention of dielectric strength after aging and physical abuse is good, dielectric stability under thermal and electric stress, excellent flexibility and push-back.It offer excellent resistance to oils, good resistance to acid,alkalies and organic solvents, these sleeving suitable for class-F(155℃)electric motor, electrical apparatus,and domestic electrical appliance as well as their protection device of collected strands of wire.

Apearance: these sleeving surface smooth, clear and neat ends, natural colour or white.
Dimension:Length: the standard length is 1000
±20 mm (Continuous length may be negotiated)

内径与壁厚
Inside Diameter and wall thickness   毫米(mm)

内径(Inside Diameter)壁厚(wall thickness)
规格(size)公差(tolerance)最小(minimum)最大(maximum)
1~3±0.200.200.60
4~9±0.300.300.70
10~16±0.500.400.80

注明:ф16毫米以上规格或特殊要求按供需双方协议。
NOTE:the size over ф 16mm or special requirement may be negotiated.


性能指标
Performance Index

性能(performance)指标  index
击穿电压(平均值)Breakdown Voltage(even)4000
2500
1000
低温弯曲性 Bending at low temperature在零下15℃中放置60分钟涂层无可见开裂或脱落。No cracking or detachment of the coating shell be visible after 60 min at -15℃
热处理后弯曲性 Bending after heat treatment 在155℃条件下放置48小时涂层无可见开裂或脱落No cracking or detachmant of the coating shell be Visible after 48±1hr at 155℃±3℃
其它性能 The other performance参见GB7113-7117-86 Reference to GB 7113-7117-86




丙烯酸酯玻璃漆管Acrylic coated fiberglass sleebing

丙烯酸酯玻璃漆管采用无碱玻璃纤维纺织,涂复特制丙烯酸酯树脂经加热而成。本产品有可靠的电性能,较好的耐热性,优良的相容性以及耐酸、碱和有机溶剂等特性,鲜艳的着色性,适用于F级(155℃)电机、电器、仪表、无线电等家用电器作布线绝缘与机械护套。

外观:表面光亮,颜色鲜艳。
尺寸:长度1000
±20 毫米(连续长度可由供需双方协议)




Acrylic coated fiberglass sleeving is made of E-fiberglss braided sleeving are baking coated with Acrylic-modified Resin, These sleeving offer dielectric reliable, heat resestance are good, and excellent compatibility with polyester, epoxy...Bright-coloured dye ability on sleeving. This is rated for class-F(155℃).It can be used for motors,electrical appliances, electrcal instruments, wireless sets collecteted stands of wire as well as their protection.

Appearance: these sleeving surface smooth, and bright multicolour.

Dimension: length:the standard length is 1000
±20 mm(continuous length may be negotiated)

内径与壁厚
Inside Diameter and wall thickness   毫米(mm)

内径(Inside Diameter)壁厚(wall thickness)
规格(size)公差(tolerance)最小(minimum)最大(maximum)
1~3±0.200.200.60
4~9±0.300.300.70
10~16±0.500.400.80

注明:ф16毫米以上规格或特殊要求按供需双方协议。
NOTE:the size over ф 16mm or special requirement may be negotiated.


性能指标
Performance Index

性能(performance)指标  index
击穿电压(平均值)Breakdown Voltage(even)4000
2500
1000
低温弯曲性 Bending at low temperature在零下15℃中放置60分钟涂层无可见开裂或脱落。No cracking or detachment of the coating shell be visible after 60 min at -15℃
热处理后弯曲性 Bending after heat treatment 在155℃条件下放置48小时涂层无可见开裂或脱落No cracking or detachmant of the coating shell be Visible after 48±1hr at 155℃±3℃
其它性能 The other performance参见GB7113-7117-86 Reference to GB 7113-7117-86



玻璃纤维定纹套管Weave setting fiberglass sleeving

玻璃纤维套管采用无碱玻璃纤维编织经高温清洗后,浸渍少量表面处理剂而成,具有耐高温的特点(600℃)良好的柔弹性和耐化学性,适用于低压电器和高温条件人的电机、电器、仪表作导线集成护套和隔离。

外观:管子圆整、不散口,白色或淡灰色。
尺寸:长度1000±20毫米(连续长度可由供需双方协议)




Weave setting fiberglass sleeving is made of E-fiberglass braided, Sleeving through high temperature treated then impregnated a small amout treatment agent.this sleeving possesses the characterislic of high temperature resistance(600℃),good flexibility and resestance chemical.Sutable use for low-voltage or higer temperature situration, electric machmery, electric appliance,domestic electrical collected strands of wire and their keep apart.protection.

Appearance: sleeving is round, the ends without loose, white colour or light grey.
Dimension: length 1000
±20 mm(Continuous length may be negotiated)

定纹套管(worm sleeve)定纹套管(worm sleeve)
定纹套管(worm sleeve)定纹套管(worm sleeve)

内径与壁厚
Inside Diameter and wall thickness   毫米(mm)

内径(Inside Diameter)壁厚(wall thickness)
规格(size)公差(tolerance)最小(minimum)最大(maximum)
1~3±0.200.200.60
4~9±0.300.300.70
10~16±0.500.400.80

注明:ф16毫米以上规格或特殊要求按供需双方协议。
NOTE:the size over ф 16mm or special requirement may be negotiated.

性能指标
  performance index

耐热性:套管在500±10℃马弗炉内灼烧不硬化,允许微量冒烟。
Heat resiitance:the sleeving will not harden and permit a little smoke at 500±10℃ furnace muffle.

剪口特性:套管截面用剪刀剪断后。剪口平整、不松散。
Cutting feature:when the sleeving crosscut the cross end without loose and remain smooth.

击穿电压:800伏(at 0-20℃,相对温度65%条件下)
breakdown voltage:800v(at 0-20℃,moisture 65%)



苏州市华晶云母制品工贸有限公司版权所有
All right reserved by Suzhou Huajing Mica Products I&T Co., Ltd 

 Mica productssleeve productsmetal processing